Spinner Question

[Karl G. Mueller]

MessageChuck,

Shorten the front end of  the True-Turn adapter nut and use an extra
washer between prop and nut to stop the nut from bottoming out
on shaft.

Karl G. Mueller
kgamueller at rogers.com

  ----- Original Message ----- 
  From: Chuck Czarnik 
  To: 'discussion at nsrca.org' 
  Sent: Wednesday, October 02, 2002 1:00 PM
  Subject: Spinner Question


  Has anybody figured out a way to get a TT 3" FAI spinner to mount on an OS 1.60 FX?  Problem is that the adapter nut is so long that the spinner won't seat on the backplate (by at least 1/4").  I've talked to Tru-Turn, and options are:

  1. Change to std spinner (which may put me out of the 2m box)
  2. Modify the adapter nut in lathe to cut it down.  But if I modify it, the nut may bottom on the crank, which means that I'd have to cut the crank down (and I'm not planning on doing that).

  Any tips appreciated, Chuck
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20021002/902f6c81/attachment.html