OS Piston Pin

[Bryan Kennedy]

Verne
 
I just rebuilt #1 I have 3 and used a metal stamp kit and punched a number
1,2,3 in each so I can tell the difference. Anyway for what it is worth, I
just replaced the ring in #1 and it is tricky too. I found it worked to
insert the piston/ring combo onto the crank, then insert the sleeve, but it
is a very delicate procedure... Don't get in a hurry. it will go, and once
it slips in you will say, Wow!
 
I thought this might help when re- assembling yours...
 
At least that was my experience.
 
I now have # 1 in the box as a back up, #3 in the primary bird, # 2 in the
back up....
 
Take care 

Bryan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030702/c6deaa12/attachment.html