[Pattern] CF pipe repair

Gray E Fowler gfowler at raytheon.com
Thu Jul 3 05:42:55 AKDT 2003


Yours I fixed the inlet tube...much different -very hot and I used a Hysol 
9394 high temp epoxy...something the average pattern schmoe cannot obtain. 




Gray Fowler
Principal Chemical Engineer
Composites Engineering




"Wayne Galligan" <wgalligan at goodsonacura.com>
Sent by: discussion-request at nsrca.org
07/03/2003 08:25 AM
Please respond to discussion

 
        To:     <discussion at nsrca.org>
        cc: 
        Subject:        Re: [Pattern] CF pipe repair


I can attest to his ability to fix these things. He fixed mine this way 
and it is holding just fine... thank you mister epoxy chemist!
 
Wayne G.
 
----- Original Message ----- 
From: Gray E Fowler 
To: discussion at nsrca.org 
Sent: Thursday, July 03, 2003 8:18 AM
Subject: RE: [Pattern] CF pipe repair


You do not need carbon fiber, fiberglass will work fine. A light weave 
will be the easiest to wrap around the stinger, use several layers of 
light fabric as opposed to one heavy layer. JB weld is not so great but 
may be the best stuff that you have acess to.  The stinger does not get 
overly hot so JB stuff may be fine. In reality most finishing resins have 
the same temp resistance as JB weld and will wet the fabric much easier. 



Gray Fowler
Principal Chemical Engineer
Composites Engineering 



"Anthony Romano" <anthonyr105 at hotmail.com> 
Sent by: discussion-request at nsrca.org 
07/03/2003 08:04 AM 
Please respond to discussion 
        
        To:        discussion at nsrca.org, rickwallace45 at hotmail.com 
        cc:         
        Subject:        RE: [Pattern] CF pipe repair




That was what I planning just need to find some CF that I can use. Any 
other 
suggestions?


>From: "Rick Wallace" <rickwallace45 at hotmail.com>
>To: <anthonyr105 at hotmail.com>
>Subject: RE: [Pattern] CF pipe repair
>Date: Wed, 2 Jul 2003 22:01:42 -0400
>
>Hi, Anthony --
>Does this mean we've found something in the woods??? I hope so!
>
>I repaired a cracked  ESkorepa  CF pipe with JB weld and uniweb, which
>is a thin non directional carbon fiber product. (It's the only kind of
>carbon fiber I have / had in the shop)
>Anyway, here's how it went
>-cleaned it all up w/ alcohol and maybe acetone
>-saturated the carbon cloth with JB Weld
>-Coated the crack and surrounding area with JB weld
>-Put the patch in place making sure there was full contact-- a couple
>wraps of the carbon cloth as I recall
>-Wrapped that with clear plastic (a la Monokote backing)
>- taped that solidly to maintain good pressure
>
>Left the shop.
>
>The repair lasted 50+ flights, and when the midair happened, the
>repaired section was unbroken -- the pipe DID break 6" on either side of
>the repair.
>
>Hope this helps!
>
>Are you planning on coming down this way anytime this weekend? Still
>thinking about bbq'ing at the field one day this weekend.
>Probly won't be Friday = that'll be annother building day for the Focus.
>
>
>Good luck!
>
>Rick
>
>
> > -----Original Message-----
> > From: pattern-admin at rcmailinglists.com [mailto:pattern-
> > admin at rcmailinglists.com] On Behalf Of Anthony Romano
> > Sent: Wednesday, July 02, 2003 12:45 PM
> > To: pattern at rcmailinglists.com
> > Subject: [Pattern] CF pipe repair
> >
> > I need to repair an ES pipe that has the stinger cracked pretty badly
> > right
> > at the base. What would be the best material, technique, adhesive etc.
> >
> > TIA
> >
> > Anthony
> >
> > _________________________________________________________________
> > Add photos to your messages with MSN 8. Get 2 months FREE*.
> > http://join.msn.com/?page=features/featuredemail
> >
> > _______________________________________________
> > http://www.rcmailinglists.com/mailman/listinfo/pattern

_________________________________________________________________
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. 
http://join.msn.com/?page=features/virus

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#




-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030703/afdf0cf7/attachment.html


More information about the NSRCA-discussion mailing list