TV Camera System

Ron Van Putte vanputte at cox.net
Sat Jan 3 08:37:23 AKST 2004


On Jan 3, 2004, at 10:55 AM, Wayne Galligan wrote:

>
> Does this setup transmit back to a TV that can be setup to record on 
> VHS?
>

The camera/transmitter transmits to a receiver, which is connected to 
the TV via a cord into the TV's video input.  You can record the 
picture on the TV's VCR.  Range is limited on my 200mw system, but I 
expect the line-of-sight range will improve with the 800 mw system.

Ron

> ----- Original Message -----
> From: "Ron Van Putte" <vanputte at cox.net>
> To: <discussion at nsrca.org>; "IMAC (E-mail)" <mini-iac at yahoogroups.com>
> Sent: Saturday, January 03, 2004 10:35 AM
> Subject: TV Camera System
>
>
>>
>> I have been playing with a TV system that I picked up on E-Bay.  If 
>> you
>> do an E-Bay search on "spy camera", you'll get lots of hits.  A large
>> percentage are for 200 and 800 milliwatt combinations of a miniature
>> color TV camera, transmitter, amplifier (in 800 mw unit), receiver and
>> cabling.  Both are powered by ordinary 9-volt batteries.  The
>> camera/transmitter/amplifier is small enough to carry on an airplane.
>> I have been experimenting with the 200 mw combination and have an 800
>> mw combination on the way to me (from Hong Kong).  You can get the 200
>> mw combination for under $30 and the 800 mw combination for under $40.
>> Sorry to be off-topic,  but I thought a lot of you would enjoy playing
>> with this inexpensive 'toy'.
>>
>> Ron Van Putte
>>
>> =====================================
>> # To be removed from this list, send a message to
>> # discussion-request at nsrca.org
>> # and put leave discussion on the first line of the body.
>> #
>>
>>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#



More information about the NSRCA-discussion mailing list