OS 1.60 and Perry pump

Wayne Galligan wgalligan at goodsonacura.com
Tue Jun 22 06:48:33 AKDT 2004


Jon,

No return line needed, no check valve needed. Why add un-needed parts.  I just used two lines one from the clunk to the pump and then to the engine and one vent line.  Run the vent line out behind the tank so it does not leak out on downlines or while moving the plane on the line.

Wayne Galligan
  ----- Original Message ----- 
  From: JonLowe at aol.com 
  To: discussion at nsrca.org 
  Sent: Tuesday, June 22, 2004 7:06 AM
  Subject: OS 1.60 and Perry pump


  Bought the Perry pump last night for my OS 1.60.  Where do you plumb in the fuel return tee, before the needle valve, or between the needle valve and the carb?  Also, are you running a second vent line, having a dedicated fuel return line, or using the check valve in one vent/fuel return line line?

  Thanks!

  Jon Lowe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040622/9dde894b/attachment.html


More information about the NSRCA-discussion mailing list