Pull Pull Tip

Mon Sep 6 04:32:51 AKDT 2004

Took a piece of stainless 2-56 all threaded rod....heated red hot on the end, bent around a piece of wire to make a full loop.   Cut the threaded straight part to length needed. Allows a lot more adjustment than the 2-56 threaded eye bolts that are out there.
    Also cheap, light, can't fail, only one part....

Happy Labor Day!

Bob Pastorello
rcaerobob at cox.net
www.rcaerobats.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040906/39aaec49/attachment.html