[NSRCA-discussion] Fw: Header Brace

[Robert & Casey Green]

Attache dis the picture of the Brace if you missed it.
----- Original Message ----- 
From: Claude Weimer 
To: NSRCA-discussion at lists.nsrca.org 
Sent: Saturday, December 30, 2006 10:15 PM
Subject: [NSRCA-discussion] Header Brace


I used the Hatori header last season and did not have any problems with it coming loose. I have heard and read of problems on this forum so I bought two of the braces Central sells. The braces I bought from Central must be for a header different than the ones I have, because mine does not have all the holes around the flange. I am building an Impulse and I may have not put a brace on the header, except I have a 50 size Oxalys with the smaller size Hatori header and muffler and header and it came loose on this plane. I really do not like to deal with things coming loose so I decided to do something about it.

 

I know I am making a short story long so I will get to the point. I made my own brace that is cheap, light, and easy to make. I used some 1/2 x 1/16 aluminum strap I bought at Lowes and a couple bolts. So I thought I would shear it with the forum.

 

Claude Weimer   



--------------------------------------------------------------------------------


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070104/03f0603d/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: airplane part.jpg
Type: image/jpeg
Size: 25393 bytes
Desc: not available
Url : http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070104/03f0603d/attachment.jpg