[NSRCA-discussion] Brio Kit set-up

[Anthony Romano]

Brian recommended 23% but never accurately calculated mine.
 
Anthony
 


From: jnhiller at earthlink.net
To: nsrca-discussion at lists.nsrca.org
Date: Mon, 3 Jan 2011 08:37:05 -0800
Subject: Re: [NSRCA-discussion] Brio Kit set-up






Would anyone care to share the CG location as a percentage of MAC.
Just curious!
Jim
 
 
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Richard Strickland
Sent: Monday, January 03, 2011 8:26 AM
To: NSRCA
Subject: [NSRCA-discussion] Brio Kit set-up
 
I had asked some of the same questions to Dave G. some time ago--here is his response:

> Richard,
> 
> The original settings for the Brio are as follows. They are starting
> points but will be close.
> 
> The C/G is 8" back from the wing leading edge at the fuselage side.
> 
> With the fuselage sitting on a level surface with the tail post blocked
> up 1", the stab is set at 0 degrees and the wing is set at 1/2 degree
> positive.
> 
> Control throws are:
> Ailerons 1/2" up and down
> Elevator 3/8 up and down
> Rudder 40 degrees left and right with 50% expo.
> 
> Some airplanes required some aileron differential and some did not. If
> required it will be more down than up because of the top hinging
> 
> Dave
_______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20110103/fd3a5649/attachment.html>