<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1126" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>Hi Jerry,</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>I sheet over everything and then when dry, just hold the wing
up to a light and you can see the cutout very nicely. <STRONG><U>Mark &
cut out the correct side!!!!</U></STRONG> I personally build the servo
boxes after I cut out the servo hole. I find I can get an easy, very
solid box support by running the balsa box sides & ends up from the bottom
of the servo box and let them stand proud of the wing shape. Sand flush for
a perfect box. For what it's worth here's some pictures:</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Before: <A
href="http://members.shaw.ca/nsrcawestdistrict/pictures/enigma/wing/servobx.htm">http://members.shaw.ca/nsrcawestdistrict/pictures/enigma/wing/servobx.htm</A> </FONT></DIV>
<DIV><FONT size=2> </FONT></DIV>
<DIV><FONT size=2>After: </FONT><FONT size=2><A
href="http://members.shaw.ca/nsrcawestdistrict/pictures/enigma/wing/srvotray.htm">http://members.shaw.ca/nsrcawestdistrict/pictures/enigma/wing/srvotray.htm</A></FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Dave</FONT> </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=jerrywil@swbell.net href="mailto:jerrywil@swbell.net">Jerry
Wilson</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion@nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Sunday, January 12, 2003 6:27
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Sheeting wings-Elan</DIV>
<DIV><BR></DIV>Raining here in Houston, so today I'm going to sheet the foam
wings on my<BR>Elan (one of them anyway). Just wondering about sheeting
over the retract<BR>block and wheel well, & aileron servo mount. Do you
just measure their<BR>location, then after sheeting go back and find them and
cut out the<BR>sheeting?<BR><BR>thanks,<BR><BR>Jerry
Wilson<BR><BR>=====================================<BR># To be removed from
this list, send a message to <BR># <A
href="mailto:discussion-request@nsrca.org">discussion-request@nsrca.org</A><BR>#
and put leave discussion on the first line of the
body.<BR>#<BR></BLOCKQUOTE></BODY></HTML>