<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2715.400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY style="COLOR: #000000; FONT-FAMILY: Arial" bgColor=#ffffff>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2>Reeves,</FONT></DIV>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2></FONT> </DIV>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2>The pant is held to the
strut with a single 4-40 screw. I install a lite ply plate on the inside of the
pant. When using the klett axle, I cut a hex hole through the pant and ply
doubler so that the pant is flush to the strut. Then, with the pant and axle in
place and aligned, I drill through the strut into the pant/doubler. Use a t-nut
on the back side of the plate. The 4-40 screw is located directly above the axle
(about 3/8" center-of-axle to center- of-screw). Of course, you need to be sure
the 4-40 screw doesn't protrude too far into the pant so as to grab the
wheel.</FONT></DIV>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2></FONT> </DIV>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2>Cheers,</FONT></DIV>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2></FONT> </DIV>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2>Ken Blackwell</FONT></DIV>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2></FONT> </DIV>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2></FONT> </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000080 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=reeves@mtaonline.net href="mailto:reeves@mtaonline.net">Reeves</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion@nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, March 03, 2003 11:36
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Axles for Fixed Gear
(picture)</DIV>
<DIV><BR></DIV>
<DIV><FONT size=2>Hi Ken, What are you using to hold the wheel pant to
the Bolly gear on the inside of the axel? Reeves</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=KBlackw@snowhill.com href="mailto:KBlackw@snowhill.com">Kenneth
Blackwell</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion@nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, March 03, 2003 7:53
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Axles for Fixed Gear
(picture)</DIV>
<DIV><BR></DIV>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2>In addtion to the lower
price, the Klett axles allow one to support the outboard side of the
pants. This isn't possible with the NB axles. </FONT></DIV>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2></FONT> </DIV>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2>Using the Keltt axles,
I glue a little piece of lite ply with a 5/32" hole on the inside of the
pant (outboard pant side), then trim the axle so that it just fits into the
lite ply hole.</FONT></DIV>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2></FONT> </DIV>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2>On the other side, the
Klett is steel and requires use of collars or other wheel retainer...i.e.
weighs a few grams more than the NB axles. So if you are a weight
fanatic...or really need to loose some weight the NB might be a
solution....but ++++$.</FONT></DIV>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2></FONT> </DIV>
<DIV><FONT face="Comic Sans MS" color=#000080 size=2>Ken
Blackwell</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000080 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=tony@radiosouthrc.com href="mailto:tony@radiosouthrc.com">Tony
Stillman</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion@nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, March 03, 2003 9:22
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Axles for Fixed Gear
(picture)</DIV>
<DIV><BR></DIV>
<DIV>I can't believe anyone would pay that much for them! Especially
when the Klett's are out there for $2.79 for a pair!</DIV>
<DIV> </DIV>
<DIV>Tony Stillman<BR>Radio South, Inc.<BR>3702 N. Pace
Blvd.<BR>Pensacola, Fl 32505<BR><A
href="http://www.radiosouthrc.com">www.radiosouthrc.com</A><BR>800-962-7802</DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=nsrcawestdistrict@shaw.ca
href="mailto:nsrcawestdistrict@shaw.ca">NSRCA Canada-West</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion@nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Saturday, March 01, 2003
11:38 PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Axles for Fixed Gear
(picture)</DIV>
<DIV><BR></DIV>
<DIV>Here's a picture of the NB version from my building site. Hope it's
useful.</DIV>
<DIV> </DIV>
<DIV><A
href="http://members.shaw.ca/cdn_nats2003/enigma/bellypan/lg1.htm">http://members.shaw.ca/cdn_nats2003/enigma/bellypan/lg1.htm</A></DIV>
<DIV> </DIV>
<DIV>
<DIV>Dave</DIV></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=nedimbek@shaw.ca href="mailto:nedimbek@shaw.ca">Nedim Bek</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion@nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Saturday, March 01, 2003
10:26 AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Axles for Fixed
Gear</DIV>
<DIV><BR></DIV>
<DIV><FONT size=2>Yes, These are the axles manufactured by NB
Engineering and they are specially designed for Bolly or compatible
fixed gear with wheel pants in use with Dave Brown or similar light
wheels. Very light and easy to use.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>Nedim</FONT> </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=ehaury@aol.com
href="mailto:ehaury@aol.com">ehaury@aol.com</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion@nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Saturday, March 01, 2003
8:26 AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: MK Axles for Fixed
Gear</DIV>
<DIV><BR></DIV><FONT face=arial,helvetica><FONT lang=0 face=Arial
size=2 FAMILY="SANSSERIF">Bolly Props NA have an aluminum axle
listed for fixed gear. (<A
href="http://www.bollyprops.com/">http://www.bollyprops.com/</A>)
(landing gear)<BR><BR>Earl</FONT>
</FONT></BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>