<br><font size=2 face="sans-serif">Guys....</font>
<br>
<br><font size=2 face="sans-serif">Do what Lance said...Back off the pump pressure. Both Lance and I flew the Webra/Bully for years and every single one of them required a lower pump pressure than how it was set from the factory. You will know that you have too low of a pressure when you can open the needle valve all the way and there is no change. Get there and then increase it a bit. Once you get that set you will find that you can adjust the low end needle to do what it was supposed to do...adjust the idle not the mid range. &nbsp;The engine does not require alot of pressure to operate.....just enough to get it to the carb.<br>
<br>
<br>
<br>
Gray Fowler<br>
Principal Chemical Engineer<br>
Composites Engineering</font>