<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2716.2200" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY
style="BORDER-RIGHT: medium none; BORDER-TOP: medium none; FONT: 10pt verdana; BORDER-LEFT: medium none; BORDER-BOTTOM: medium none"
bgColor=#ffffff>
<DIV><FONT face=Arial>That is great to here Jim, I will more then
likely end up going that route as well in the end. I just got mine
back together { same new parts as yours but I replaced bearings as well
}, went in one turn on pump. Took it to the field Sunday and it would not
pump any fuel at all, I pulled the lines from the pump and hooked my
fuel jug straight to the inlet and it won't pump a drop. I think I will go
your route before buying a new pump. Glad to hear you are finally getting
to get some good quality flying in. I am going to pull pump apart tonight and
see what is up. </FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=jivey61@msn.com href="mailto:jivey61@msn.com">jim ivey</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, June 16, 2003 12:08
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Webra-cline</DIV>
<DIV><BR></DIV>
<DIV>Info for Brian Billings</DIV>
<DIV> Just an update on my webra- Focus. I replaced the piston, ring and
rod, I installed the cline system with a regular backplate with pressure tap.
The tank pressure runs 7.5 to 8.0 PSI.</DIV>
<DIV>I now have 1.5 gals fuel through the engine with 10 flights today. I set
it up for 8000 and 2000 rpm's. The engine now runs flawless. There are no
stumbles in midrange, no hesitations on advancing throttle and best of all, no
sags on long up lines. On the 3 point up top hat, I set the throttle at 3/4 to
start up and it's still at 3/4 pulling across on the top. Now maybe I can get
down to business.</DIV>
<DIV> </DIV>
<DIV>Jim Ivey<BR><BR>jivey61@msn.com</DIV></BLOCKQUOTE></BODY></HTML>