<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1170" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>
<DIV>
<DIV><FONT face=Arial size=2>For those searching for devices to make non-pumped
motors work more reliably....Iron Bay Models has just the ticket.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>I have used this "Iron Bay" regulator for a
couple days, notwithstanding the bearing issue, and it has been foolproof.
Pressurizes the tank like a YS regulator, too! WHen you pull the vent, you
get that SHWOOOOSSSSSHHH of pressure....very comforting.</FONT></DIV>
<DIV><FONT face=Arial size=2> It is ABSOLUTELY a "demand only"
regulator, meaning that ONLY the vacumn from the carb causes fuel to flow.
And I tested the snot out of that thing using an insulin syringe to simulate
vacuum in VERY small draws. It provides pressure, just by bumping the prop
back and forth, and has a check valve from the crankcase tap so it gets to max,
and stays there.</FONT></DIV>
<DIV><FONT face=Arial size=2> Needles ended up just
like the manual for the engine says (for normal pipe/muffler pressure), so that
tells me it's not providing TOO MUCH fuel (like the CLines that I tried did -
everytime), no hydrolocking, no siphoning when off, even leaving the tank
pressurized (I forgot between flight attempts, and it didn't seep a
drop)</FONT></DIV>
<DIV><FONT face=Arial size=2> I'm sold on it and will get
another for my PW Extra that that I'm converting to an OS 1.60
also.</FONT></DIV>
<DIV><FONT face=Arial size=2>Here's the link: </FONT></DIV>
<DIV><FONT face=Arial size=2><A
href="http://www.ironbaymodelcompany.com/Webpages/Accessories/Fuel Regulator.html">http://www.ironbaymodelcompany.com/Webpages/Accessories/Fuel%20Regulator.html</A></FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>It is FAR superior to my unsatisfactory experience
with the Cline, and may just make the OS 1.60 really a serious option for
folks. Time will tell.</FONT></DIV></DIV></DIV><FONT face=Arial size=2>
<DIV><BR>Bob Pastorello, Oklahoma<BR>NSRCA 199, IMAC 1320, AMA 46373<BR><A
href="mailto:rcaerobob@cox.net">rcaerobob@cox.net</A><BR><A
href="http://www.rcaerobats.net">www.rcaerobats.net</A></DIV>
<DIV> </DIV>
<DIV></FONT> </DIV></BODY></HTML>