<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 5.50.4807.2300" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Thanks Bob,</FONT></DIV>
<DIV><FONT face=Arial size=2>The rod wasn't sliding on the piston pin
because of deposit. Everything is dismantled now. I will reassemble it this
afternoon and it should fly tomorrow.</FONT></DIV>
<DIV><FONT face=Arial size=2>Xavier</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=rcaerobob@cox.net href="mailto:rcaerobob@cox.net">Bob Pastorello</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion@nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Saturday, July 12, 2003 8:03
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: OS 1.60 FX con rod</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>I just had to do this last week...here's what
worked for me. First, I removed the sleeve. This gave me the
clearance to slide the conrod toward the rear on the crankpin. While
slowly turning the crank, I found the spot where the clearance was right to
let it slide off. It came off easily then.</FONT></DIV>
<DIV><FONT face=Arial size=2> Reinstalling was a bit of a
challenge, because you have to get the conrod on the crankpin, and start the
sleeve OVER the piston from the top. Be careful about the pin index in
the piston ring groove...there is one, it is very small, and must have the
ring positioned properly to let the sleeve compress it.</FONT></DIV>
<DIV><BR>Bob Pastorello, Oklahoma<BR>NSRCA 199, IMAC 1320, AMA 46373<BR><A
href="mailto:rcaerobob@cox.net">rcaerobob@cox.net</A><BR><A
href="http://www.rcaerobats.net">www.rcaerobats.net</A></DIV>
<DIV> </DIV>
<DIV> </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=xavier.mouraux@sympatico.ca
href="mailto:xavier.mouraux@sympatico.ca">Anne & Xavier</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion@nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, July 11, 2003 9:51
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> OS 1.60 FX con rod</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>Hello guys,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I am having trouble removing the piston and
connecting rod of my 160FX. Do they come off together ? The sleeve is
removed. I tried pulling on the rod with crank at TDC but could only get it
halfway out. I didn't want to force it out before asking.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial
size=2>Xavier</FONT></DIV></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>