<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1">
<title></title>
</head>
<body>
<br>
<br>
Tony Quist wrote:<br>
<blockquote type="cite"
cite="mid000101c38ebb$b2b63520$ad7d6e44@tqte2pvjrjqj11">
<pre wrap="">I use the Alpha to charge all my Nimh. But I use c/10. Most High capacity small size batteries were not meant to be fast charged. If you used the alpha and the pack was the only one charging, it would be a 1 amp charge. That is a pretty hot charge for that type of battery.</pre>
</blockquote>
<br>
I have been charging the 1650 mah NiMH transmitter pack in my Futaba 9Z at
1 amp with an FMA SuperNova, using a NiMH preset mode, for more that a year.
1 amp is only 0.6 C for that battery pack. I have had zero problems with
it.<br>
<br>
Ron Van Putte<br>
<blockquote type="cite"
cite="mid000101c38ebb$b2b63520$ad7d6e44@tqte2pvjrjqj11">
<pre wrap="">
-----Original Message-----
From: <a class="moz-txt-link-abbreviated" href="mailto:discussion-request@nsrca.org">discussion-request@nsrca.org</a> [<a class="moz-txt-link-freetext" href="mailto:discussion-request@nsrca.org">mailto:discussion-request@nsrca.org</a>]
On Behalf Of Verne Koester
Sent: Thursday, October 09, 2003 2:38 PM
To: <a class="moz-txt-link-abbreviated" href="mailto:discussion@nsrca.org">discussion@nsrca.org</a>
Subject: Re: NIMH TX pack
Derek,
I went to the Litco site and read all of their instructions on using the
Alpha on NIMH packs and followed those instructions to the letter on my
2000mah NIMH Tx pack. The pack got much hotter than I felt it should and
I
shut it down before it was finished. After checking with more
experienced
guys who had been using NIMH including feeling the temp of their packs
at
peak charge, I came to the conclusion that the Alpha isn't suited to
NIMH
batteries. I bought a GP Titan charger and it works great. This isn't
meant
to slight the Alpha in any way since I've been using it on Nicads with
great
success for years. However, my experience indicates it isn't he best
choice
for NIMH.
Verne
----- Original Message -----
From: "Derek Koopowitz" <a class="moz-txt-link-rfc2396E" href="mailto:derekkoopowitz@earthlink.net"><derekkoopowitz@earthlink.net></a>
To: <a class="moz-txt-link-rfc2396E" href="mailto:discussion@nsrca.org"><discussion@nsrca.org></a>
Sent: Thursday, October 09, 2003 4:54 PM
Subject: NIMH TX pack
</pre>
<blockquote type="cite">
<pre wrap="">I just ordered a new (replacement) TX NimH battery pack from Cermark.
</pre>
</blockquote>
<pre wrap=""><!---->It
is a 1650mah pack. I've never had a NimH pack before so I'd like to
find
out from the experts out there if there is anything I need to do
differently
than a standard NiCad pack. Can I use my Alpha 4 to charge it? I do
have a
Dymond charger that I can use and I know that it does support NimH but
I'd
prefer to use the Alpha 4 because of its AC/DC versatility.
</pre>
<blockquote type="cite">
<pre wrap="">
Thanks.
=====================================
# To be removed from this list, send a message to
# <a class="moz-txt-link-abbreviated" href="mailto:discussion-request@nsrca.org">discussion-request@nsrca.org</a>
# and put leave discussion on the first line of the body.
#
</pre>
</blockquote>
<pre wrap=""><!---->
=====================================
# To be removed from this list, send a message to
# <a class="moz-txt-link-abbreviated" href="mailto:discussion-request@nsrca.org">discussion-request@nsrca.org</a>
# and put leave discussion on the first line of the body.
#
=====================================
# To be removed from this list, send a message to
# <a class="moz-txt-link-abbreviated" href="mailto:discussion-request@nsrca.org">discussion-request@nsrca.org</a>
# and put leave discussion on the first line of the body.
#
</pre>
</blockquote>
<br>
</body>
</html>