<HTML><FONT FACE=arial,helvetica><FONT COLOR="#8000ff" SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">Eddie<BR>
L have been using Berkley 20# coated fishing leader with the proper crimps for years I have never had one break. After I crimp it I put a spot of thin CA on the crimp and slide a small piece of heat shrink over it. Works for me.<BR>
Buddy <BR>
PS. I quit usee pull pull for elevator years ago I now use Carbon fiber Arrow Shaft with a bearing on each end and a short shaft with a ball joint on each end so the push rod is always moving in a straight line and the short shaft takes care of the arc swing of the servo movement. I copied this from Glenn Watson a number of years ago and have had no problems with it.</FONT></HTML>