<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1">
<title></title>
</head>
<body text="#000000" bgcolor="#ffffff">
A set on NB Engineering 5/32 Aluminum Axle Set Part 2506 from Bolly
North America are just under 5 g per axle with all mounting hardware
and work pretty well. They are all alumiunum and use an "E" clip to
hold the wheel. The groove works pretty well, but I put a little Goop
or silicon on the pant and gear leg to make sure they don't rotate, but
if there was enough stress, such as going into tall grass, the pants
can rotate instead of break.<br>
<br>
Ray<br>
<br>
Bill Pritchett wrote:<br>
<blockquote type="cite"
cite="mid001301c3c7c9$aa6ab660$21473344@VALUEDCB7D4C82">
<meta http-equiv="Content-Type" content="text/html; ">
<meta content="MSHTML 6.00.2800.1276" name="GENERATOR">
<style></style>
<div><font face="Arial" size="2">Thoughts on mounting the Bolly CF
pants to the Bolly CF gear?? The pants are grooved to match the
outline of the gear......will the axle, mounted with an aircraft nut,
prevent rotation of the pants?? Does everyone "capture" the outside of
each wheel with a collar, or let it ride against the pants?</font></div>
<div><font face="Arial" size="2">Thanks</font></div>
<div> </div>
<div><font face="Arial" size="2">Bill Pritchett<br>
765-744-9322</font></div>
</blockquote>
</body>
</html>