<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD><TITLE>Hydeout cheek cowls</TITLE>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1170" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I would take the flange off.......then in order to
match the contour of the cheeks' base</FONT></DIV>
<DIV><FONT face=Arial size=2>to the fuselage, put some stick back sand paper on
the fuselage, where the cheeks </FONT></DIV>
<DIV><FONT face=Arial size=2>will be glued, then move the cheeks back and forth
or up and down to sand to shape.</FONT></DIV>
<DIV><FONT face=Arial size=2>120 grit should do....</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>As for gluing, you can tack glue with CA or 5
minute epoxy, then come back with a </FONT></DIV>
<DIV><FONT face=Arial size=2>fairly dry mixture of micro balloons and slow cure
epoxy and make a small fillet all</FONT></DIV>
<DIV><FONT face=Arial size=2>around....Once dry, use a small diameter dowel and
wrap sticky back sand paper</FONT></DIV>
<DIV><FONT face=Arial size=2>on it to sand the fillet.....should be easy
and the fillet adds about 2 grams to each</FONT></DIV>
<DIV><FONT face=Arial size=2>cheek....about 1/8" diameter fillet should
do.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Before gluing, scuff the the areas that glue will
be applied to with 220ish</FONT></DIV>
<DIV><FONT face=Arial size=2>grit paper lightly </FONT><FONT face=Arial
size=2>just to take the shine off, wipe with alcohol and smell some glue
;-)</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Take care,</FONT></DIV>
<DIV><FONT face=Arial size=2>Amir</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial"> </DIV><!-- Converted from text/rtf format -->
<P><FONT face=Arial size=2>All,</FONT> </P>
<P><FONT face=Arial size=2>I'm building a Hydeout and its about finished. One
of the last things I need to do is glue on the cheek cowls. I could use some
advice on how others did this. The cheek cowls have about a 1/2" flange. The
fuse sides are not perfectly flat and I'm dot sure how to hold them in place
as they dry. So here are a few questions for those of you who have done
this:</FONT></P>
<P><FONT face=Arial size=2>1.) What glue did you use?</FONT> <BR><FONT
face=Arial size=2>2.) Did you keep the flange or cut some of it off?</FONT>
<BR><FONT face=Arial size=2>3.) How did you hold it in place as the glue
dries?</FONT> <BR><FONT face=Arial size=2>Thanks for your advice!</FONT> </P>
<P><FONT face=Arial size=2>--Gordon</FONT> </P></BLOCKQUOTE></BODY></HTML>