<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1">
<title></title>
</head>
<body text="#000000" bgcolor="#ffffff">
I've had problems with the 21st Century irons. I've broken several in
half where the handle joins the shoe. In fact, one I bought at a hobby
shop was broken when I opened the box. (thankfully, I opened it in the
Hobby Shop.) Still my favorite, though. And, they've been promptly
replaced at no charge. So, to cover myself, (har!) I own 3 of them.
Don't know if anyone else has the same problem, though.<br>
<br>
Bill Glaze<br>
<br>
Brian Young wrote:<br>
<blockquote type="cite"
cite="mid20040322143543.19579.qmail@web13423.mail.yahoo.com">
<pre wrap="">My 21st Century quit working. I opened it up to have a
look and a solder joint had failed. FIxed that and its
been ok since. I also dont build much though.
--- Terry Terrenoire <a class="moz-txt-link-rfc2396E" href="mailto:amad2terry@juno.com"><amad2terry@juno.com></a> wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Ted: you can get a replacement shoe for the Monokote
iron, and make it
good as new.
My experience with the 21st Century iron has been
just the opposite. I've
had mine since they came out 10 years or so ago, and
have just had to
replace the shoe once. I build 8-10 planes a year,
so maybe it just likes
to be used and not hidden in a closet!!!! :)
Terry T.
On Sun, 21 Mar 2004 07:31:12 -0600 "Ted Sander"
<a class="moz-txt-link-rfc2396E" href="mailto:tedsander@comcast.net"><tedsander@comcast.net></a>
writes:
Hey Michael – just in time. I was thinking of
polluting the list with a
“Test” to see if I could post messages (haven’t been
able to for
months!). Now I can send a legit response!
The 21st Century iron is very good – excellent temp
response, great shape
on the shoe for working in all the tight spots. I
frequently don’t even
need to think about firing up my little Monokote
trim iron. The bad –
I’ve found that it just doesn’t last. I’ve had 3
burn up on me in the
last 5 yrs, and I’m not a very prolific builder
(couple of three planes a
year). At some point, the thermostat sticks on, the
iron overheats, and
then fails completely – no heat again. I still buy
them – but it is the
one electrical item in my house that I NEVER leave
plugged in when I’m
not around, even for potty breaks, etc……just can’t
be trusted!
Now, my old Monokote iron continues to work like a
champ after almost 30
yrs. Too bad it’s so scratched that it’s only use
is in place of 80
grit!
Ted
-----Original Message-----
From: <a class="moz-txt-link-abbreviated" href="mailto:discussion-request@nsrca.org">discussion-request@nsrca.org</a>
[<a class="moz-txt-link-freetext" href="mailto:discussion-request@nsrca.org">mailto:discussion-request@nsrca.org</a>]
On Behalf Of michael Medlin
Sent: Sunday, March 21, 2004 7:20 AM
To: <a class="moz-txt-link-abbreviated" href="mailto:discussion@nsrca.org">discussion@nsrca.org</a>
Subject: Re: Monokote help provided!
I'm looking to buy a new iron to cover my Focus 2
and was looking at the
coverite 21st century with the heat setting knob in
the handle. It claims
to hold heat within 3 degrees . Does anyone have any
experience with this
iron as far as quality and life expectancy? Thanks,
Michael
----- Original Message -----
From: <a class="moz-txt-link-abbreviated" href="mailto:EHaury@aol.com">EHaury@aol.com</a>
To: <a class="moz-txt-link-abbreviated" href="mailto:discussion@nsrca.org">discussion@nsrca.org</a>
Sent: Thursday, March 18, 2004 7:43 AM
Subject: Re: Monokote help provided!
Some of the best MK work I've done has been with
Terry's method.
Unfortunately there's a variable that crept in, that
being the equipment.
My old faithful heatgun gave up the ghost! Three new
guns and they're all
junk. One howls like a banshee and all three deliver
heat somewhere
besides where they're aimed and each at different
temps. I hate buying
things that then need be rebuild / engineered for
them to work properly!
Irons aren't much better. As someone in this thread
mentioned, most have
uneven heat distribution over the sole. Some have a
broad temp range for
a given setting. The low cost types with the
bi-metal control are usually
the widest. I've had one with a solid state temp
control fail high and
flame a sock within seconds. All in all a wide
variation in performance
of the usual MK application equipment.
I suspect that those with good equipment have good
experiences with MK
and vice versa. If you're lucky enough to be the
former, be wary if you
replace equipment.
Earl
</pre>
</blockquote>
<pre wrap=""><!---->
__________________________________
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.
<a class="moz-txt-link-freetext" href="http://taxes.yahoo.com/filing.html">http://taxes.yahoo.com/filing.html</a>
=====================================
# To be removed from this list, send a message to
# <a class="moz-txt-link-abbreviated" href="mailto:discussion-request@nsrca.org">discussion-request@nsrca.org</a>
# and put leave discussion on the first line of the body.
#
</pre>
</blockquote>
</body>
</html>