<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1264" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Scott Boca will tell you which bearing # ( sealed
rear only ).The only pump I have run is the Hanno, which is the same as the
140RX. The 140 pump assembly is expensive and you still have to install it with
JBWeld. I feel sure the new heli assy with the Perry will be a better choice.The
stock carb will work fine but you will need to screw in the idle adjust. I'm
running an ES pipe, also a Macks 15cc. I run 2 head shims with the 30%
fuel. nat</FONT></DIV></BODY></HTML>