<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Looking for feedback on how to best set up the
mounting on a Greve pipe setup in a Focus II. Webra 1.60, Johnson header
with 2 1/4" rise and 3 deg offset. First issue is that there
is essentially no clearance between the header and the glass pan.
Apparently you have to cut it and extend it. I suppose you can just use
silicon coupler to join the cut sections? How much length of exposed
silicon can you get away with between the two sections?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Next issue is that the aft end of the pipe needs to
get directed down and away from the fuse bottom. What sort of extension
are you guys using and how do you attach it?</FONT></DIV>
<DIV><FONT face=Arial size=2>Thanks</FONT></DIV>
<DIV><FONT face=Arial size=2>Ed</FONT></DIV></BODY></HTML>