<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=US-ASCII">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR></HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: Arial"
bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=role_document
face=Arial color=#000000 size=2>
<DIV>Engine doesn't want to fire. Symptoms:
<DIV>Fuel draw not the best, very little pressure in the tank, compression seems
OK. When we first pulled the cowl the fuel was to the filter which was the
high spot in the line, after some fidgeting (not sure why) the fuel line had
visible fuel to the engine. </DIV>
<DIV>Removed the glow plug, put a few drops of fuel in the cylinder still
basically wouldn't fire. There we a couple of very minor puts while
turning with the starter after putting the fuel drops in the
cylinder. Pulled valve cover, valve gap not the problem. Glow plug
glows, check valve is in the correct direction. If you put your
finger over the pipe exhaust can't feel any pressure pulses as we turned
the engine over. This engine hasn't been run since comming back from YS
(supposedly rebuilt).</DIV>
<DIV> </DIV>
<DIV>Phil</DIV></DIV></FONT></BODY></HTML>