<html><body>
<P>I have a question in regard the conversion from metal to nylon gears. I have two planes one is older. Both with 8411 and 9411 metal gears. When I flew the new one with new servos I could not feel any difference in the air compared with the old plane. The new plane didn't not have any noticiable slop. Now both have develop some slop and looks like the slop does not change with time. I can feel the slop with my hands but I can not feel it in the air. Both planes are flying great. Are you guys having the same experience? if yes, why we need to replace the gears?</P>
<P>Please don't tell me that I am too old to feel the difference. I know that the first problem you notice is that trim changes continuosly. Unfortunetely, this could be true since I am more than 50 forever. </P>
<P>Vicente Bortone</P>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">-------------- Original message -------------- <BR><BR>> JRPS8411SAC <BR>> <BR>> This is leaving the metal output gear in place. I choose to do this on all <BR>> my servos I convert. I like the Metal Output gear as it gives better <BR>> connection to the aluminum Servo Arms I use. I know some have chosen to <BR>> replace the output with a plastic one, either way works...But the 8411SA <BR>> Conversion kit doesn't include the output gear just the internal gears <BR>> needed and a new face plate. <BR>> <BR>> The gears are actually from an 8101, 8231 gear set This is where you get the <BR>> nylon output gear if you choose it.....Like I said I don't, the nylon output <BR>> gears have more flex than the metal ones and I prefer to use a machine screw <BR>> with blue thread locker as opposed to the self tapping screw. <BR>> <BR>> Enjoy, <BR>> <BR>> Troy <BR>> ----- Original Message ----- <BR>> From: "gabrielg74" <GABRIELG74@PRODIGY.NET.MX><BR>> To: <DISCUSSION@NSRCA.ORG><BR>> Sent: Wednesday, July 28, 2004 12:56 PM <BR>> Subject: 8411 conversion to SA <BR>> <BR>> <BR>> > I have several 8411 servos becoming sloppy, I would like to convert them <BR>> to plastic gears, can anybody tell me what is the replacement set (part <BR>> number) to convert a metal 8411 to SA?, and where to get it? <BR>> > <BR>> > Thanks, <BR>> > <BR>> > Gabriel <BR>> > <BR>> > ===================================== <BR>> > # To be removed from this list, go to http://www.nsrca.org/discussionA.htm <BR>> > and follow the instructions. <BR>> > <BR>> > <BR>> ===================================== <BR>> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm <BR>> and follow the instructions. <BR>> </BLOCKQUOTE></body></html>