<DIV> Matt I ran the Webra last year and it didn't work to my satisfaction until I added the MC carb. The engines are real stump pullers once you get the bugs worked out. Mike<BR><BR><B><I>Gordon Anderson <GAA@owt.com></I></B> wrote:
<BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<DIV dir=ltr align=left><SPAN class=245035500-01082004>MattK</SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=245035500-01082004></SPAN> </DIV>
<DIV dir=ltr align=left><SPAN class=245035500-01082004>Thanks for the advice. The idea about using a perry pump is very appealing. I have been running this pump on an OS 1.60 in my Focus for about 30 gallons of fuel and it has been very reliable. This might be something I should try before changing motors, its a ton of work change to a different powerplant!</SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=245035500-01082004></SPAN> </DIV>
<DIV dir=ltr align=left><SPAN class=245035500-01082004>--Gordon</SPAN></DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma><B>From:</B> discussion-request@nsrca.org [mailto:discussion-request@nsrca.org] <B>On Behalf Of </B>Rcmaster199@aol.com<BR><B>Sent:</B> Saturday, July 31, 2004 2:54 PM<BR><B>To:</B> discussion@nsrca.org<BR><B>Subject:</B> Re: More Webra problems<BR></FONT><BR></DIV>
<DIV></DIV>
<DIV>
<DIV>Another good method we have used here in hot and muggy FLA is to do as Jim sez with tapping the backplate of the 145, but running the separate Perry P30 pump and stock webra 145 TN carb. Really works well since the pump is out in the breeze and gets plenty of cooling keeping it from cavitating. </DIV>
<DIV> </DIV>
<DIV>The stock webra pump is suspect and has ruined many a practice session or contest for many guys, me included. In my experience the engine itself is excellent with outstanding handling characteristics, as long as fuel delivery to the carb is done correctly. FWIW</DIV>
<DIV> </DIV>
<DIV>Gordon, BTW, the Mintor has more problems than just fuel delivery, You might want to use caution. I recommend you get the 140RX. replace the bearing with the stainless steel before you even run it and then enjoy a couple years of trouble free service. Many guys run this set-up with excellent results</DIV>
<DIV>MattK</DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: blue 2px solid"><FONT face=Arial>Gordon<BR>I bought a regular backplate for my Webra 145,tapped for a pressure fitting, and installed a cline regulater and a check valve which comes with the cline regulater. You now will have the tank pressurized similar to a YS system.This setup broadens the needle adjustments and makes the webra run well.<BR>Just make sure you mount the regulater as close to the carburater as possible,like 3 inches. I used this setup last summer.I also had problems with the finnicky pump and this is the only way I could make this excellant engine to run reliable.<BR>You spend 70+ more and have a good setup.<BR><BR>Jim Ivey<BR><BR>> <BR>> From: "Gordon Anderson" <GAA@owt.com><BR>> Date: 2004/07/31 Sat PM 05:58:32 EDT<BR>> To: <discussion@nsrca.org><BR>> Subject: More Webra problems<BR>> <BR>> I thought I dad the Webra problems solved but this turns out not to be the
case.<BR>> Today I had 2 more dead stick landings. In over a dozen flights I have had only<BR>> 3 power on landings. I'm done with this thing.<BR>> I'm interested in recommendations for a replacement 2 stroke. I can't seem to<BR>> find a OS 1.40RX. I have had good luck with the OS 1.60 but I don't want to hack<BR>> up the fuse for the wrap around header. Anyone have feedback on the Mintor?<BR>> If you are thinking about a webra, DON'T<BR>> <BR>> --Gordon</FONT></BLOCKQUOTE></DIV>
<DIV></DIV></BLOCKQUOTE></DIV><p>
<hr size=1>Do you Yahoo!?<br>
<a href="http://us.rd.yahoo.com/mail_us/taglines/10/*http://promotions.yahoo.com/new_mail/static/efficiency.html">New and Improved Yahoo! Mail</a> - Send 10MB messages!