<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY style="FONT-SIZE: 10pt; FONT-FAMILY: Arial; BACKGROUND-COLOR: #ffffff"
bgColor=#ffffff>
<DIV>Hi Jon,</DIV>
<DIV> </DIV>
<DIV>You can do this. In order to make you thr stk the switch designation
on the radio, select thr stk for the switch. Once you have done that it
will ask you at what value you want it to come on at. Put the throttle
stick down as for as you can push it. Press and hold the center of the
round nob. You will need to hold it for around 2-3 seconds. The
radio will beep, and you will see a value that was set as the stick
designation. When you go anything above that position you should see the
mix condition go "off" when you go back down to that position it should read mix
"on". I don't have my radio in front of me right now so this is all from
memory. If you can't get it to work let me know I will get my radio in
front of me and walk you through it. I have the same mix in mine.
Good luck, let me know.</DIV>
<DIV> </DIV>
<DIV>Dan</DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=JonLowe@aol.com href="mailto:JonLowe@aol.com">JonLowe@aol.com</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion@nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, September 03, 2004 9:01
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Programming Futaba 9C</DIV>
<DIV><BR></DIV>
<DIV>I want to have about 2-3% down elevator at full idle to straighten
downlines, and have it all gone at one click above full idle. I
want to be able to switch it off for landings. I thought I
could do it by tieing it to the throttle stick as the switch, but there is no
way to switch it off. I tried a programmable mix, but all I seem to be
able to get is down elevator ABOVE full idle, not one click and below.
Hopefully someone else out there has done this and can steer me in the right
direction.</DIV>
<DIV> </DIV>
<DIV>Thanks.</DIV>
<DIV> </DIV>
<DIV><FONT size=2 PTSIZE="10">Jon
Lowe<BR></FONT></DIV></BLOCKQUOTE></BODY></HTML>