<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii">
<META NAME="Generator" CONTENT="MS Exchange Server version 5.5.2653.12">
<TITLE>RE: Temptation [PMX:]</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=2>I purchased a complete canopy and turtle deck assy from Jim Hubbard it fit great at </FONT>
<BR><FONT SIZE=2>JHub9071@aol.com </FONT>
</P>
<P><FONT SIZE=2>-----Original Message-----</FONT>
<BR><FONT SIZE=2>From: Ken Velez [<A HREF="mailto:kvelez@comcast.net">mailto:kvelez@comcast.net</A>] </FONT>
<BR><FONT SIZE=2>Sent: Tuesday, October 12, 2004 4:06 PM</FONT>
<BR><FONT SIZE=2>To: discussion@nsrca.org</FONT>
<BR><FONT SIZE=2>Subject: Re: Temptation [PMX:]</FONT>
</P>
<BR>
<P><FONT SIZE=2> Jeff the red stuff you are using is lacquer base putty, it will be attacked by the fuel proof paint products we use. What you need is a 2 part finishing and blending putty. Most of this are polyester based and you might find some problems making it stick to epoxy based materials. Make sure you scuff the areas good for proper adhesion. As far a the canopy I use epoxy resin mixed with microballons aprox. to a 50/50 mix to make the fillet.</FONT></P>
<P><FONT SIZE=2>Ken</FONT>
<BR><FONT SIZE=2>----- Original Message ----- </FONT>
<BR><FONT SIZE=2>From: "Richard Strickland" <richard.s@allied-callaway.com></FONT>
<BR><FONT SIZE=2>To: <discussion@nsrca.org></FONT>
<BR><FONT SIZE=2>Sent: Tuesday, October 12, 2004 10:12 AM</FONT>
<BR><FONT SIZE=2>Subject: Re: Temptation</FONT>
</P>
<BR>
<P><FONT SIZE=2>> Orland uses some two part automotive polyester 2 part "Dynatron </FONT>
<BR><FONT SIZE=2>> putty-cote"--fine, very light and strong, fairly inexpensive--but you</FONT>
<BR><FONT SIZE=2>gotta</FONT>
<BR><FONT SIZE=2>> work fast. Get from automotive paint stores. There are other brands </FONT>
<BR><FONT SIZE=2>> probably just as good--this is what they had the last time he bought </FONT>
<BR><FONT SIZE=2>> it</FONT>
<BR><FONT SIZE=2>and</FONT>
<BR><FONT SIZE=2>> he says they are all pretty similar for the fine,spot stuff.</FONT>
<BR><FONT SIZE=2>></FONT>
<BR><FONT SIZE=2>> Richard S.--(all normal(and abnormal) disclaimers apply)</FONT>
<BR><FONT SIZE=2>></FONT>
<BR><FONT SIZE=2>> ----- Original Message -----</FONT>
<BR><FONT SIZE=2>> From: "Jeff Hughes" <jeffghughes@comcast.net></FONT>
<BR><FONT SIZE=2>> To: <discussion@nsrca.org></FONT>
<BR><FONT SIZE=2>> Sent: Monday, October 11, 2004 7:09 PM</FONT>
<BR><FONT SIZE=2>> Subject: Temptation</FONT>
<BR><FONT SIZE=2>></FONT>
<BR><FONT SIZE=2>></FONT>
<BR><FONT SIZE=2>> > OK, building season is officially here in Southern Indiana. I'm </FONT>
<BR><FONT SIZE=2>> > about to start my Temptation. I'm going to leave the primary color </FONT>
<BR><FONT SIZE=2>> > white and just</FONT>
<BR><FONT SIZE=2>> put</FONT>
<BR><FONT SIZE=2>> > trim colors over the gelcoat. What does everybody use to fill in the</FONT>
<BR><FONT SIZE=2>seam?</FONT>
<BR><FONT SIZE=2>> > I've used that red Bondo stuff (one part). But have had some</FONT>
<BR><FONT SIZE=2>compatibility</FONT>
<BR><FONT SIZE=2>> > problems with it and lusterkote.</FONT>
<BR><FONT SIZE=2>> > Also, if you use canopy glue to glue the canopy to the hatch, what </FONT>
<BR><FONT SIZE=2>> > do</FONT>
<BR><FONT SIZE=2>you</FONT>
<BR><FONT SIZE=2>> > use to fill in the gap before painting? same stuff?</FONT>
<BR><FONT SIZE=2>> ></FONT>
<BR><FONT SIZE=2>> > Thanks,</FONT>
<BR><FONT SIZE=2>> > Jeff</FONT>
<BR><FONT SIZE=2>> ></FONT>
<BR><FONT SIZE=2>> > =====================================</FONT>
<BR><FONT SIZE=2>> > # To be removed from this list, go to</FONT>
<BR><FONT SIZE=2><A HREF="http://www.nsrca.org/discussionA.htm" TARGET="_blank">http://www.nsrca.org/discussionA.htm</A></FONT>
<BR><FONT SIZE=2>> > and follow the instructions.</FONT>
<BR><FONT SIZE=2>> ></FONT>
<BR><FONT SIZE=2>></FONT>
<BR><FONT SIZE=2>> =====================================</FONT>
<BR><FONT SIZE=2>> # To be removed from this list, go to </FONT>
<BR><FONT SIZE=2>> <A HREF="http://www.nsrca.org/discussionA.htm" TARGET="_blank">http://www.nsrca.org/discussionA.htm</A></FONT>
<BR><FONT SIZE=2>> and follow the instructions.</FONT>
<BR><FONT SIZE=2>></FONT>
</P>
<BR>
<P><FONT SIZE=2>=====================================</FONT>
<BR><FONT SIZE=2># To be removed from this list, go to <A HREF="http://www.nsrca.org/discussionA.htm" TARGET="_blank">http://www.nsrca.org/discussionA.htm</A></FONT>
<BR><FONT SIZE=2>and follow the instructions.</FONT>
</P>
<P><FONT SIZE=2>The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.</FONT></P>
</BODY>
</HTML>