<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2523" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Is the output gear shaft wearing, or the case top
allowing the bearing/shaft to move around? I've heard of similar issues,
traced to worn case top. If you have on to trade off, I'd do that...just
to see.</FONT></DIV>
<DIV><BR>Bob Pastorello<BR>NSRCA 199 AMA 46373<BR><A
href="mailto:rcaerobob@cox.net">rcaerobob@cox.net</A><BR><A
href="http://www.rcaerobats.net">www.rcaerobats.net</A></DIV>
<DIV> </DIV>
<DIV> </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=jivey61@bellsouth.net href="mailto:jivey61@bellsouth.net">Jim
Ivey</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion@nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, November 30, 2004 5:44
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Pull-Pull servos</DIV>
<DIV><BR></DIV>Guys<BR> Another discussion about pull-pull systems. I use
pull-pull on the rudder and compared to the elevator servo the rudder servo
gets worn and loose at the top bearing much quicker than the elevator
servo.The cables are not too tight and are setup correctly so far as ackerman
is concerned.The rudder being much bigger than the elevators may cause some of
this problem. More momentum...<BR> I have used the JR top post brace
before, but it can't be used with the 8411's without some mods.<BR> Any
input or solutions?<BR><BR>TIA<BR><BR>Jim
Ivey<BR><BR>=================================================<BR>To access the
email archives for this list, go to<BR><A
href="http://lists.f3a.us/pipermail/nsrca-discussion/">http://lists.f3a.us/pipermail/nsrca-discussion/</A><BR>To
be removed from this list, go to <A
href="http://www.nsrca.org/discussionA.htm">http://www.nsrca.org/discussionA.htm</A><BR>and
follow the instructions.<BR></BLOCKQUOTE></BODY></HTML>