<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#3333ff">
I realy Like the idea about the hopper tank behind the Firewall thats
pretty slick. Nice thinking<br>
<br>
Dan<br>
<br>
Jim Ivey wrote:
<blockquote
cite="mid20050314233347.LQEC7187.imf18aec.mail.bellsouth.net@mail.bellsouth.net"
type="cite">
<pre wrap=""> Steve
Wouldn't do it.
If you must install a 4 oz hopper tank right behind the firewall. At least the added weight will be useful. Then down size the main tank which should be on the CG. You basically didnt add any weight to the plane ,but balanced it.
Jim Ivey
</pre>
<blockquote type="cite">
<pre wrap="">From: "Steve Wiggin" <a class="moz-txt-link-rfc2396E" href="mailto:swiggin682@cox.net"><swiggin682@cox.net></a>
Date: 2005/03/14 Mon PM 06:26:13 EST
To: <a class="moz-txt-link-rfc2396E" href="mailto:discussion@nsrca.org"><discussion@nsrca.org></a>
Subject: Nose weight
I have to add about 2 1/2 oz of weight to the nose of my pattern plane for
static balance. Has anyone ever tried pouring molten lead into an aluminum
spinner to get the weight as far forward as possible? I would probably have
to epoxy the weight in place and balance the spinner/weight, and wonder if
this would cause undue stress on the engine bearings. Any ideas would be
appreciated.
Steve
=================================================
To access the email archives for this list, go to
<a class="moz-txt-link-freetext" href="http://lists.f3a.us/pipermail/nsrca-discussion/">http://lists.f3a.us/pipermail/nsrca-discussion/</a>
To be removed from this list, go to <a class="moz-txt-link-freetext" href="http://www.nsrca.org/discussionA.htm">http://www.nsrca.org/discussionA.htm</a>
and follow the instructions.
</pre>
</blockquote>
<pre wrap=""><!---->
=================================================
To access the email archives for this list, go to
<a class="moz-txt-link-freetext" href="http://lists.f3a.us/pipermail/nsrca-discussion/">http://lists.f3a.us/pipermail/nsrca-discussion/</a>
To be removed from this list, go to <a class="moz-txt-link-freetext" href="http://www.nsrca.org/discussionA.htm">http://www.nsrca.org/discussionA.htm</a>
and follow the instructions.
</pre>
</blockquote>
</body>
</html>