<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1479" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I'll be using either a JR PCM 10 (old) or a JR
8103. When the stick is moved quickly on the 10</FONT><FONT face=Arial size=2>,
one servo lags. I havn't tried the 8103 and am not sure if it will work with
dual elevator servos.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Jerry</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=ed_alt@hotmail.com href="mailto:ed_alt@hotmail.com">Ed Alt</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion@nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Saturday, May 14, 2005 10:50
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [SPAM] Re: dual elevator
servos</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>Your best bet is using separate channels with a
mix. With a Y setup, you will deprive yourself of the fine tuning
capability you will need to make the travels correct, unless you get lucky
with a perfectly matched set of servos out of the box. A Matchbox will
work fine, but you're adding weight, cost and an extra point of failure,
however unlikely it is that one will fail. If you use a mix, not only
can you duplicate the Matchbox capability, you can exceed it if you have a
multi-point mix capability on your radio. A Matchbox is good for center
and end points and that's it.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Ed</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=jjvoth@mtelco.net href="mailto:jjvoth@mtelco.net">jjvoth</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion@nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Saturday, May 14, 2005 11:33
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> dual elevator servos</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>I want to use dual elevator servos. Will a Y
harness with a matchbox work or do I have to use two channels? The servos
have to be about 1.2" in length. What is the best JR or Hitech servo to
use?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>TIA</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial
size=2></FONT> </DIV></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>