<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2627" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I just fired my YS-91 up after the valve
cleaning. It fired immediately and had plenty of power while still running
rich. After running for a minute or two the rpm's started fluctuating a
bit. The more it ran the less rpm's I was able to maintain. I heard
a noticable rattle that seemed to be coming from the engine area. After
the engine ran for about 5 minutes, the rpm's started to drop more. I
leaned the needle a little and the revs didn't increase, so I richened it back
up and idled down, the motor died. I felt the spinner to see if it was
warm and it wasn't, that's when I noticed the movement of the output
shaft. My first thought is the front bearing, I have quite a bit of
movement up and down and a little side to side.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I guess I'm not meant to fly this plane. Does
anybody know where I can get a good YS-91, cheap?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I think this one is going back to YS.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Ken</FONT></DIV></BODY></HTML>