<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2627" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Thanks John,</FONT></DIV>
<DIV><FONT face=Arial size=2>With the crank moving like it is, I'm going to
replace the bearings and then re-set the valve clearance on
re-assembly,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Ken</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=johnferrell@earthlink.net
href="mailto:johnferrell@earthlink.net">John Ferrell</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion@nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, June 08, 2005 9:49
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: YS valve not the only
problem</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>Verify the valves are still in adjustment. When
they seat, they will eed a readjust...</FONT></DIV>
<DIV> </DIV>
<DIV>John Ferrell <BR><A
href="http://DixieNC.US">http://DixieNC.US</A><BR></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=mrandmrst@comcast.net href="mailto:mrandmrst@comcast.net">Ken
Thompson</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=discussion@nsrca.org
href="mailto:discussion@nsrca.org">discussion@nsrca.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, June 08, 2005 9:05
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> YS valve not the only
problem</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>I just fired my YS-91 up after the valve
cleaning. It fired immediately and had plenty of power while still
running rich. After running for a minute or two the rpm's started
fluctuating a bit. The more it ran the less rpm's I was able to
maintain. I heard a noticable rattle that seemed to be coming from the
engine area. After the engine ran for about 5 minutes, the rpm's
started to drop more. I leaned the needle a little and the revs didn't
increase, so I richened it back up and idled down, the motor died. I
felt the spinner to see if it was warm and it wasn't, that's when I noticed
the movement of the output shaft. My first thought is the front
bearing, I have quite a bit of movement up and down and a little side to
side.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I guess I'm not meant to fly this plane.
Does anybody know where I can get a good YS-91, cheap?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I think this one is going back to
YS.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial
size=2>Ken</FONT></DIV></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>