<html><body>
<DIV>I am running the 160 sized carbon fiber pipe with the Karl Muller header on 15% nitro. No adjustments to pipe length, what Karl sent is what I use. Tach not working at the moment, but to say vertical is unlimited is an understatement.</DIV>
<DIV> </DIV>
<DIV>Randy</DIV>
<DIV> </DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">-------------- Original message -------------- <BR><BR>> Randy - what pipe, length, nitro you using? What rpm you getting with that? <BR>> <BR>> My OS's will TURN the 13 pitch, but it is a strain I don't like to put on the <BR>> motor. <BR>> <BR>> Bob Pastorello <BR>> > <BR>> > From: randy10926@comcast.net <BR>> > Date: 2005/07/11 Mon PM 03:11:37 EDT <BR>> > To: discussion@nsrca.org <BR>> > Subject: Re: 3 blade prop <BR>> > <BR>> > I would think so. <BR>> > <BR>> > My os160 have no problems with an APC 15.75X13 three blade. Since I heard the <BR>> pitch measure less for a Bolly than an APC, I wonder if a Bolly 18X10 would be <BR>> enough prop. <BR>> > <BR>> > Randy <BR>> > <BR>> > -------------- Original message -------------- <BR>> > <BR>> > Bob <BR>> > <BR>> > Do you think that a OS 1.60 will turn the Bolly 18x10 three blade ? <BR>> > <BR>> > Robert <BR>> > <BR>> <BR>> Bob Pastorello, El Reno, OK, USA <BR>> rcaerobob@cox.net <BR>> www.rcaerobats.net <BR>> <BR>> ================================================= <BR>> To access the email archives for this list, go to <BR>> http://lists.f3a.us/pipermail/nsrca-discussion/ <BR>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm <BR>> and follow the instructions. <BR>> <BR>> List members email returned for mailbox full will be removed from the list. <BR>> </BLOCKQUOTE></body></html>