<html><body>
<DIV>I believe what you need is a "spanner" wrench to loosen the nuts at the back end of the starter - they are the bolts that appear at the front of the body. I made my own wrench from a piece of .125" aluminum. A skinny set of needle nose pliers might also work. You will have some fun putting it back together - the brushes are spring loaded against the commutator and need to be "pinned" open via the pinholes in plastic case/housing on the back end of the body.</DIV>
<DIV> </DIV>
<DIV>Good luck,</DIV>
<DIV><BR>Dave</DIV>
<DIV> </DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">-------------- Original message -------------- <BR><BR>> My Kavan starter has some trash in the planetary gears. I have removed the <BR>> cone holder in the front but am at a loss how I <BR>> further dissassemble it. There appears to be two bolts that go from the rear to <BR>> the front of the body; but, I cannot find the screw <BR>> head. <BR>> Can anyone help ? <BR>> Thanks, <BR>> Paul <BR>> <BR>> ================================================= <BR>> To access the email archives for this list, go to <BR>> http://lists.f3a.us/pipermail/nsrca-discussion/ <BR>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm <BR>> and follow the instructions. <BR>> <BR>> List members email returned for mailbox full will be removed from the list. <BR>> </BLOCKQUOTE></body></html>