<html><div style='background-color:'><DIV class=RTE>
<P>You can also make a 'spanner' out of a flat tip screwdriver you don't care much about -- a little dremel work to take out the center of the blade and you're there... </P>
<P><BR>>From: DaveL322@comcast.net<BR>>Reply-To: discussion@nsrca.org<BR>>To: discussion@nsrca.org<BR>>Subject: Re: Kavan starter dissassembly ?<BR>>Date: Tue, 12 Jul 2005 18:59:59 +0000<BR>><BR>>I believe what you need is a "spanner" wrench to loosen the nuts at the back end of the starter - they are the bolts that appear at the front of the body. I made my own wrench from a piece of .125" aluminum. A skinny set of needle nose pliers might also work. You will have some fun putting it back together - the brushes are spring loaded against the commutator and need to be "pinned" open via the pinholes in plastic case/housing on the back end of the body.<BR>><BR>>Good luck,<BR>><BR>>Dave<BR>><BR>>-------------- Original message --------------<BR>><BR>> > My Kavan starter has some trash in the planetary gears. I
have removed the<BR>> > cone holder in the front but am at a loss how I<BR>> > further dissassemble it. There appears to be two bolts that go from the rear to<BR>> > the front of the body; but, I cannot find the screw<BR>> > head.<BR>> > Can anyone help ?<BR>> > Thanks,<BR>> > Paul<BR>> ><BR>> > =================================================<BR>> > To access the email archives for this list, go to<BR>> > http://lists.f3a.us/pipermail/nsrca-discussion/<BR>> > To be removed from this list, go to http://www.nsrca.org/discussionA.htm<BR>> > and follow the instructions.<BR>> ><BR>> > List members email returned for mailbox full will be removed from the list.<BR>> ><BR></P></DIV></div></html>