<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2722" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face="Arial Narrow" size=4>I've followed directions from previous
posts on removing the wrist pin. In fact I removed it for a previous bearing
change. Now I'm unable to remove it. I'm using one of the four millimeter bolts
threaded into the pin. I've shimmed the piston against the cylinder with
popsicle sticks and pulled hard. I then used a longer 4mm bolt and clamped it in
a vise and pulled on the engine quite hard; at least as hard as I dare. I've
scraped the carbon from the area aft of the pin. Still no luick. (Yes, the
circlip is removed.)</FONT></DIV>
<DIV><FONT face="Arial Narrow" size=4></FONT> </DIV>
<DIV><FONT face="Arial Narrow" size=4>Anyone have any other ideas I might
try?</FONT></DIV>
<DIV><FONT face="Arial Narrow" size=4></FONT> </DIV>
<DIV><FONT face="Arial Narrow" size=4>Thanks, Dave</FONT></DIV></BODY></HTML>